Astm F 1450 pdfs

Searching:
pdf
SECTION 11190 - DETENTION SECURITY HOLLOW METAL DOORS AND FRAMES

SECTION 11190 - DETENTION SECURITY HOLLOW METAL DOORS (1-3/4”) AND ... manufacturer shall submit to the architect evidence of compliance with ASTM F 1450 and ASTM F

http://www.habershammetal.com/specs/1_75HollowDoorSpec.pdf

Date added: August 18, 2016 - Views: 1

pdf
GUIDE SPECIFICATIONS FOR DETENTION SECURITY HOLLOW METAL ...

G. ASTM F 1450-97 (2004), Standard Test Methods for Hollow Metal Swinging Door . 4 Assemblies for Detention and Correctional Facilities.

http://www.trussbilt.com/p_documents/Detention%20Security%20HM%20Spec%203_2005.pdf

Date added: August 20, 2016 - Views: 1

pdf
GUIDE SPECIFICATIONS FOR

G. ASTM F 1450-97 (2004), Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities. H. ASTM F 1592-01, Standard ...

http://cheinc.com/pdf/East%20Vincent%20Muni%20Complex/081123%20FL%20-%20Detention%20Security%20HM%20Doors%20and%20Frames.pdf

Date added: August 24, 2016 - Views: 1

pdf
SECTION 11190 - DETENTION SECURITY HOLLOW METAL DOORS AND FRAMES

Test doors and frames shall be prepared for hardware as specified in ASTM F 1450, Section 6 “Specimen Preparation”. 2. Testing Procedures . a.

http://www.habershammetal.com/specs/HollowDoorSpecs.pdf

Date added: August 18, 2016 - Views: 1

pdf
www.nospill.com

ASTM F 852-99 (REAPPROVED 2006) LLC P 245-1600 f 245-1606 www.tsglabs.com ... Fuel Container, Model # 1050/1450 5.0-gallon Gasoline, ...

http://www.nospill.com/ASTM_1450.pdf

Date added: August 27, 2016 - Views: 1

pdf
MINIMUM RESIDENTIAL SECURITY RECOMMENDATIONS

Sliding Door assemblies should comply with ASTM: F842-83, Grade 30, or the California Model Building Security Code (CMBSO) relating to sliding doors.

https://www.portlandoregon.gov/police/article/125732

Date added: August 28, 2016 - Views: 1

pdf
FIRE Door Products - Anemostat

BR-7 BULLET AND IMPACT RESISTANT METAL VISION FRAME ... MEETS ASTM F-1450-9 7† †Tested in Compliance with ASTM F-1450-97 Must use 1/4” x 20 Thru Bolt blank

http://www.anemostat.com/doorproducts/literature/br-7.pdf

Date added: August 27, 2016 - Views: 1

pdf
GUIDE SPECIFICATIONS FOR COMMERCIAL SECURITY HOLLOW METAL ...

K. ASTM F 1450-97 Standard Test Methods for Hollow Metal ... This test is designed to evaluate the capability of a commercial security hollow metal door, ...

http://www.trussbilt.com/p_documents/Commercial%20Security%20HM%20Spec%207_05.pdf

Date added: September 1, 2016 - Views: 1

pdf
HOLLOW AMERICAN NATIONAL STANDARD METAL ANSI/ HMMA 863 MANUAL ...

Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities”, and ASTM F 1592, ... A. Door Assembly Impact Load Test – ASTM F 1450--

https://www.naamm.org/content/uploads/products/hmma_863-14.pdf

Date added: February 22, 2017 - Views: 1

pdf
SERIES 1450 Class AW-PG75 ATD, Architectural Terrace Door ...

SERIES 1450 Class AW-PG75 ATD, Architectural Terrace Door ... ASTM F 588, Type and Grade as indicated for each Product.

http://www.crystalwindows.com/dl/s1450-spec.pdf

Date added: August 20, 2016 - Views: 5

pdf
Scientific Plastics, Inc Specifications 1

Scientific Plastics, Inc. Specifications 1.0 ... Tray conforms to ASTM F 1412 for ... will provide secondary containment to comply with OSHA 1910.1450 and EPA 264 ...

http://www.scientificplastics.com/index_htm_files/SP%20SPEC%20SHEET%201.0.pdf

Date added: August 20, 2016 - Views: 2

pdf
Technical Summary HMMA 890 HOLLOW METAL

Side-light frame test; and multiple light frame test under ASTM F 1450 and F 1592. Bullet Resistance testing, where applicable, is performed in accordance with UL-752.

http://hmxpress.com/wp-content/uploads/2016/03/HMMA_890-06.pdf

Date added: February 22, 2017 - Views: 1

pdf
ASTM F 2389-3 - IAPMO Intranet

astm standard f 2389 – standard specification for pressure-rated polypropylene (pp) piping systems side by side comparison of standards astm f 2389-2007 and astm f

http://intranet.iapmo.org/standards/docs/iapmo_std_1450.pdf

Date added: August 27, 2016 - Views: 1

pdf
Addendum No. 2 - bidcondocs.delaware.gov

L. ASTM F 1450-92, Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities . M. ASTM F 1577-95, ...

http://bidcondocs.delaware.gov/OMB/OMB_ML3804000093_add2.pdf

Date added: November 11, 2016 - Views: 1

pdf
SMOOTH FIBERGLASS, TEXTURED FIBERGLASS & STEEL ENTRY DOORS

ASTM F-1450 - Door Static Load Test Sec. 7.3: Minimum Load: 1,000 lbs. Timberline CE Load: 2,169 lbs. ments for sawing, planing, routing, boring, drilling and chisel.

https://www.washingtonenergy.com/wp-content/uploads/2016/07/2013CodelBrochureFINALFINALFINAL.pdf

Date added: October 16, 2016 - Views: 1

pdf
What is High-Performance PE4710 Polyethylene

What is High-Performance PE4710 Polyethylene? ... ASTM D 2837 and PPI TR-3 are used to determine the ... 1450 psi) MRS rating at 20°C (68°F); nothing more ...

http://www.wlplastics.com/pdf/WL123-0412%20High-Performance%20PE.pdf

Date added: August 18, 2016 - Views: 18

pdf
ASTM A36 Mild/Low Carbon Steel - h & r steel

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and

http://www.hrsteelservice.com/uploads/A36_properties.pdf

Date added: August 18, 2016 - Views: 11

pdf
Ultra Corr / Ultra Rib Submittal & Data Sheet - JM Eagle

ultra rib™ sewer pipe astm f794 & aashto m304 nominal ... 21 20.656 22.92 26.17 0.160 1450 ... ultra corr™ / ultra rib ™ astm f-794/949 pvc profile wall sewer pipe

http://www.jmeagle.com/pdfs/2008%20Submittal%20Data%20Sheets/Ultra%20Corr-Rib.pdf

Date added: August 27, 2016 - Views: 1

pdf
SEALVAR (ASTM F-15 Alloy or UNS K94610) Nickel Iron Cobalt Strip

SEALVAR ® (ASTM F-15 Alloy or UNS K94610) Nickel Iron Cobalt Strip ... 1450°C CURIE POINT 435°C SPECIFIC HEAT

http://www.ametek-ct.com/pdf/tech/Sealvar-ASTM-F15-Datasheet.pdf

Date added: August 27, 2016 - Views: 14

pdf
Sheet Materials Data Sheets 04.04 - The Flexitallic Group

M ECHANICAL P ROPERTIES(ASTM F152) ... Max T (at min. thickness) 752°F (400°C) Max P (at min. thickness) 1450 psi pH Range 3 - 11 Color Off-White Density 112 lb/ft3 ...

http://www.flexitallic.com/uploads/files/dataSF2420.pdf

Date added: August 27, 2016 - Views: 1

pdf
Chapter 5 - Standard Specifications, Standad Test Methods and ...

Chapter 5 Standard Specifications, Standard Test Methods and Codes for PE (Polyethylene) Piping Systems 127 TABLE 1 Cell Classification System from ASTM D 3350-06 1,2

http://plasticpipe.org/pdf/chapter05.pdf

Date added: August 18, 2016 - Views: 12

pdf
TECHNICAL DATA SHEET - Access Hose Int'l

TECHNICAL DATA SHEET ... Maximum Operating Pressure 1450 PSI Specification Compliance ASTM Line callout F104F712122A9B4E12M4 ... CREEP RELAXATION ASTM F 38 % 30 Max.

http://www.accesshoseintl.com/NAM37.pdf

Date added: August 27, 2016 - Views: 1

pdf
Summary of Ballistic Threat Levels and Ratings

Summary of Ballistic Threat Levels and Ratings . Table X1.1 ASTM F 1233 . Handguns ... ASTM sub. m.g. 9 mm by 19 (HV) 124 1350 1450 3 (e) 25.0 BSI GO 9 mm by 19 ...

http://www.banditproof.com/pdfs/88.pdf

Date added: August 27, 2016 - Views: 3

pdf
MUNICIPEX WATER SERVICE LINE - Emco Waterworks

– 210 psi @ 180ºF (1450 kPa @ 82ºC) – 180 psi @ 200ºF ... ASTM F 876, F 877, CSA B 137.5, NSF-pw, PEXa (material designation), SDR9 (standard

https://www.emcowaterworks.com/documents/pipes-water_service_tubing-rehau.pdf

Date added: January 17, 2017 - Views: 1

pdf
INSTALLATION INSTRUCTIONS 5-1/2' Cast Iron Bath

the requirements of ASTM-F-462 for slip resistance. NOTE: DO NOT use steel wool, wire brushes, metal scrapers or abrasive

https://www.americanstandard-us.com/-/media/sites/asus/files/product-instruction-manuals/bulk/disco/installation2696102.pdf

Date added: February 22, 2017 - Views: 1

pdf
409 STEEL STAINLESS - AK Steel Holding

409 STEEL STAINLESS ... ASTM A 240 AK Steel 409 UNS S40920 0.040" - 0.070" Ultimate Tensile Strength, ... proximately 1450 °F (789 °C). This is con-

http://www.aksteel.com/pdf/markets_products/stainless/ferritic/409_Data_Sheet.pdf

Date added: August 18, 2016 - Views: 7

pdf
HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS

HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS STEELS NiDI Distributed by NICKEL DEVELOPMENT ... temperatures are covered by ASTM Specifications E21 and E151.

http://www.nickelinstitute.org/~/Media/Files/TechnicalLiterature/High_TemperatureCharacteristicsofStainlessSteel_9004_.pdf

Date added: August 18, 2016 - Views: 26

pdf
TECHNICAL DATA SHEET MATERIAL COMPRESSED NON-ASBESTOS GASKET ...

MATERIAL COMPRESSED NON-ASBESTOS GASKET SHEET NAM 30 BLUE ... Maximum Operating Pressure 1450 PSI Specification Compliance ... IN FUEL B ASTM F 146

http://www.accesshoseintl.com/NAM30.pdf

Date added: August 26, 2016 - Views: 1

pdf
ESTERS 1 1450 - cdc.gov

ESTERS 1: METHOD 1450, Issue 3, dated 15 M arch 2003 - Page 5 of 6 NIOSH Manual of Analytical Methods (NMAM), Fourth Edition Table 1. General Information

https://www.cdc.gov/niosh/docs/2003-154/pdfs/1450.pdf

Date added: January 8, 2017 - Views: 1

pdf
material Grade Comparison Table - Maryland Metrics

International Material Grade Comparison Table The standards that correspond with DIN Material Numbers can only be ... 1.0402 C22 1020 CC20 050A20 C20C21 1450 F.112

http://mdmetric.com/tech/InternationalMaterialGradeComparisonTable.pdf

Date added: August 18, 2016 - Views: 23

pdf
www.nospill.com

1450 5.0 Gallon Gasoline can ... ASTM F-2517-05. Section 9 of the CPSA (15 U.S.C. 2058) Foreign or Domestic Manufacturer certifying compliance of the product:

http://www.nospill.com/CPSIA_cert_of_conformity_2011.pdf

Date added: November 11, 2016 - Views: 1

pdf
High Purity Nickel Strip - ametek-ct.com

High Purity Nickel Strip ... ASTM F-239, MIL-N-19153 and MIL-N-46025 ... NI GRADE 50% COLD ROLLED 1200° F 1450° F 1800° F 2000° F 2200° F

http://www.ametek-ct.com/pdf/tech/High-Purity-Nickel-Datasheet.pdf

Date added: August 20, 2016 - Views: 1

pdf
STEEL CASTINGS HANDBOOK Supplement 8 High Alloy Data Sheets ...

air cooled from 1800 oF requirements ASTM A743 Tempered at, oF 600 1100 1200 1450 _____ _____ Tensile strength, ksi 200 135 115 100 90 Yield strength, 0.2% offset ...

https://www.sfsa.org/publications/hbk/s8.pdf

Date added: August 18, 2016 - Views: 20